Cement soil permeability tester
1、 Product introduction:
It is mainly used in the test of impermeability of cement soil and the determination of impermeability grade. At the same time, it can also be used for the measurement of air permeability and quality inspection of building materials. Therefore, it has been widely used by relevant production, construction, design, teaching and research departments.
The function of the cement soil permeability coefficient tester is the same as that of the ordinary type. Its main feature is that the pressure value is displayed on the pressure display instrument through the sensor, and it can automatically boost the pressure and complete the test according to the set procedure, so as to reduce the burden of workers.
2、 Main technical parameters
1. Z large working pressure: 2.5MPa (users can choose freely under 2.5MPa)
2. Working mode: automatic constant voltage (digital display type: automatic constant voltage and automatic boost)
3. Number of test pieces available at one time: 3
4. Geometric dimension of trial mold (also known as main mold)
Diameter of upper opening of test piece cavity: φ 70mm
Diameter of lower opening of mold cavity: φ 80mm
Height: 40mm
5. Parameters of plunger pump: flow: 0.16l/min
6. Motor
Power: 120W
Power supply: 380V-50Hz
7. Overall dimension: 950 × five hundred × 800mm
8. Mass: ≈ 100kg

水泥土滲透系數試驗儀
一、產品簡介:
主要使用于水泥土抗滲性能的試驗和抗滲標號的測定。同時也可利用它做建筑材料透氣性的測定和質量檢查。因此得到了有關生產、施工、設計、教研等部門的廣泛使用。
水泥土滲透系數試驗儀功能與普通型相同,其主要特點是壓力值通過傳感器在壓力顯示儀上顯示出來,并能按設定的程序實現自動升壓、自動完成試驗,減輕工作人員負擔。
二、主要技術參數
1、Z大工作壓力: 2.5Mpa(用戶可在2.5Mpa下自由選擇)
2、工作方式:自動恒壓(數顯型:自動恒壓且自動升壓)
3、一次可作試件數: 3個
4、試模幾何尺寸(亦稱主模)
試件模腔上口直徑:φ70mm
模腔下口直徑:φ80mm
高度: 40mm
5、柱塞泵參數:流量: 0.16L/min
6、電動機
功率:120W
電源:380V-50HZ
7、外形尺寸: 950×500×800mm
8、質量:≈100KG